Author Index

A

  • Abbariki, Gh. Sensitivity Analysis and optimization of the Inducer in a Rotary Gas Separator of Electrical Submersible Pump under single phase and two phase conditions [Volume 8, Issue 3, 2018, Pages 289-302]
  • Abbasnia, A. Estimation of stress concentration factor of composite lamina with triangular hole using multiple linear regression [Volume 8, Issue 2, 2018, Pages 25-36]
  • Abbaspour, A. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Abbaspour Sani, E. Design and simulation of a two-axis thermal MEMS accelerometer with optimized sensitivity [Volume 8, Issue 2, 2018, Pages 13-24]
  • Abbasszadeh Rad, A.H. The Effect of the Kind of Attachment of Primary Cilium to Cell in Its Response to the Fluid Flow: A 3D Computational Simulation [Volume 8, Issue 1, 2018, Pages 203-213]
  • Abdolmohammadi, M. Design, Fabrication and Control of a New Type of The Omnidirectional Spherical Wrist [Volume 8, Issue 2, 2018, Pages 1-11]
  • Abedini, V. Investigation of single point incremental forming parameters effect on the blanks produced by friction stir welding [Volume 8, Issue 4, 2019, Pages 85-96]
  • Aghaee Attar, M. Investigation of single point incremental forming parameters effect on the blanks produced by friction stir welding [Volume 8, Issue 4, 2019, Pages 85-96]
  • Aghaei Tog, R. Flow field modeling and performance improving of an axial turbine's using Adjoint method [Volume 8, Issue 1, 2018, Pages 127-133]
  • Ahmadi, H. Design, Fabrication and Control of a New Type of The Omnidirectional Spherical Wrist [Volume 8, Issue 2, 2018, Pages 1-11]
  • Ahmadi, M. Evaluation of Ultrasonic Method Capability in Measurement of Longitudinal Welding Residual Stress through Thickness [Volume 8, Issue 3, 2018, Pages 29-47]
  • Ahmadi Balootaki, M. sensitivity analysis of Operational Modal Approaches in damping identification and implementation on an industrial sample [Volume 8, Issue 3, 2018, Pages 177-192]
  • Akbari, M. J. The effect of horizon size and projectile shape on the crack growth in the cracked beam using peridynamic method [Volume 8, Issue 4, 2019, Pages 39-51]
  • Alavi Gharebagh, A. An Experimental Study and Statistical Modelling on Compressive Properties of Epoxy/ Graphene/ Hydroxyapatite Nanocomposites [Volume 8, Issue 1, 2018, Pages 59-70]
  • Amini Foroushani, J. Extraction of hydrodynamic coefficients applying planning mechanism motion maneuver using computational fluid dynamics [Volume 8, Issue 1, 2018, Pages 215-228]
  • Aminy, M. Design, fabrication and modeling of a new solar still desalination system and evaluation of its performance [Volume 8, Issue 2, 2018, Pages 205-220]
  • Amiri, E. Experimental Analysis of Effective Parameters on Human Balance During Standing and Gaiting [Volume 8, Issue 1, 2018, Pages 51-57]
  • Amiri, H. Design, fabrication and modeling of a new solar still desalination system and evaluation of its performance [Volume 8, Issue 2, 2018, Pages 205-220]
  • Andakhshideh, A. Investigation of nonlinear pull-in phenomena in functionally graded micro-beams under electrostatic excitation [Volume 8, Issue 3, 2018, Pages 137-151]
  • Arabyarmohammadi, E. Optimization of shell and tube heat exchangers using heuristic algorithms [Volume 8, Issue 3, 2018, Pages 153-163]
  • Aris, H. Design, Fabrication and Control of a New Type of The Omnidirectional Spherical Wrist [Volume 8, Issue 2, 2018, Pages 1-11]
  • Ashenai Ghasemi, F. The effects of arbitrary boundary conditions on a laminated composite plate response subjected to large mass & low velocity impact [Volume 8, Issue 1, 2018, Pages 35-49]
  • Attar, A. Investigation of the effect of geometrical parameters on the out-of-plane displacement of a T-shaped piezoelectric microcantilever [Volume 8, Issue 4, 2019, Pages 1-9]
  • Ayati, M. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Azami, M. Structural damage localization in beam-like structures using Multi-channel Empirical Mode Decomposition of random response [Volume 8, Issue 3, 2018, Pages 221-231]
  • Azimi, A. Numerical Simulation of 3-D Pollution Propagated from a Gaseous Source Through ‎Indoor Space by Applying Pressure Zonal Model [Volume 8, Issue 1, 2018, Pages 99-109]

B

  • Baghdar Hosseini, Saeed Numerical study of solid-gas two phase flow in air-side of a compact heat exchanger using Lagrangian approach [Volume 8, Issue 2, 2018, Pages 143-159]
  • Bagheri, A. Gear Fault Detection Based on Best Feature Selection by Particle Swarm Optimization [Volume 8, Issue 3, 2018, Pages 49-64]
  • Baniassadi, M. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Barati, E. The impact analysis on airfield matting plate with considering the aircraft tyre deflection [Volume 8, Issue 2, 2018, Pages 69-79]
  • Barati, E. Numerical and experimental fatigue life estimation of airplane emergency door bracket in various mission profiles [Volume 8, Issue 4, 2019, Pages 143-152]
  • Baraty beni, S. Study of the effect of nano-fluid in the diesel-cooled diesel engine oil cooler [Volume 8, Issue 2, 2018, Pages 221-233]
  • Barimani Varandi, A. Numerical and experimental study on the effect of forming speed in gradient warm deep drawing process [Volume 8, Issue 2, 2018, Pages 51-66]
  • Bayani Ahangar, Sh. Experimental investigation on the effect of preprocessing in fabrication of superhydrphobic surfaces on laminar drag reduction [Volume 8, Issue 4, 2019, Pages 239-248]
  • Bazdidi-Tehrani, F. Analysis Of Turbulent Combined Heat Transfer (Mixed Convection-Thermal Radiation) Heat Transfer in a Vertical Three Dimensional Duct With Variable Thermo-physical Properties [Volume 8, Issue 1, 2018, Pages 83-97]
  • Bazdidi-Tehrani, F. Flow Field Analysis of a Synthetic Jet in the Presence of a Crossflow: Application of Different Turbulence Models [Volume 8, Issue 4, 2019, Pages 197-210]
  • Bina, R. Investigation of instability and vibration behavior of microbeam-gyroscope with considering distribution of proof mass [Volume 8, Issue 2, 2018, Pages 93-106]
  • Binabaji, Y. Computational simulation of airflow in the human trachea-bronchial airways [Volume 8, Issue 2, 2018, Pages 125-142]

C

  • Chavoshnejad, P. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]

D

  • Dadrasi, A. An Experimental Study and Statistical Modelling on Compressive Properties of Epoxy/ Graphene/ Hydroxyapatite Nanocomposites [Volume 8, Issue 1, 2018, Pages 59-70]
  • Daneshgar, E. Numerical Simulation of 3-D Pollution Propagated from a Gaseous Source Through ‎Indoor Space by Applying Pressure Zonal Model [Volume 8, Issue 1, 2018, Pages 99-109]
  • Dashti, M. A. Optimal search of heat sources location in conjugate natural convection with surface radiation in a two-dimensional enclosure utilizing particle swarm optimization algorithm [Volume 8, Issue 2, 2018, Pages 177-191]
  • Dehghan, A. A. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]
  • Dehghan, M. Investigation of the effect of geometrical parameters on the out-of-plane displacement of a T-shaped piezoelectric microcantilever [Volume 8, Issue 4, 2019, Pages 1-9]
  • Dehghani, M. The impact analysis on airfield matting plate with considering the aircraft tyre deflection [Volume 8, Issue 2, 2018, Pages 69-79]
  • Dehghani Mobarake, M. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]

E

  • Ebrahimi Mamaghani, A. Free lateral vibration analysis of inhomogeneous beams under various boundary conditions [Volume 8, Issue 3, 2018, Pages 123-135]
  • Ebrahimi Mamaghani, Ali Target energy transfer from a doubly clamped beam subjected to the harmonic external load using nonlinear energy sink [Volume 8, Issue 4, 2019, Pages 165-177]
  • Ebrahimnezhad-Khaljiri, H. Study of the Compressive Behavior of Fiber-Metal Hybrid Structures Reinforced by Jute-Glass Fibers [Volume 8, Issue 4, 2019, Pages 153-164]
  • Eftekhari, M. Evaluation of Ultrasonic Method Capability in Measurement of Longitudinal Welding Residual Stress through Thickness [Volume 8, Issue 3, 2018, Pages 29-47]
  • Emdadi Hor, V. Analysis Of Turbulent Combined Heat Transfer (Mixed Convection-Thermal Radiation) Heat Transfer in a Vertical Three Dimensional Duct With Variable Thermo-physical Properties [Volume 8, Issue 1, 2018, Pages 83-97]
  • Eslami-Farsani, R. Study of the Compressive Behavior of Fiber-Metal Hybrid Structures Reinforced by Jute-Glass Fibers [Volume 8, Issue 4, 2019, Pages 153-164]
  • Ezadi Yazdi, M.J. Experimental Investigation of Effects of Split Blended Winglet at Tip Vortex Structure of Micro-Aerial Vehicle with Hot-Wire Anemometry [Volume 8, Issue 2, 2018, Pages 193-204]

F

  • Fallah, A. Blades Vibration Response Study of a Bladed Disk System Connecting with Two Lacing Wires and Mistuning Effect [Volume 8, Issue 4, 2019, Pages 97-109]
  • Fallah, A. Buckling analysis of functionally graded rectangular microplate in thermal environment based on exponential shear deformation theory using the modified couple stress theory [Volume 8, Issue 4, 2019, Pages 179-196]
  • Farahani, M. R. Evaluation of Ultrasonic Method Capability in Measurement of Longitudinal Welding Residual Stress through Thickness [Volume 8, Issue 3, 2018, Pages 29-47]
  • Farhangmehr, V. A Characteristic-Based Finite-Volume Solution of Incompressible Flows with Heat Transfer [Volume 8, Issue 3, 2018, Pages 315-326]
  • Farshidianfar, A. Experimental investigation on natural frequencies of thin rectangular plates using contact and non-contact methods [Volume 8, Issue 1, 2018, Pages 1-11]
  • Fathali, M. Investigation on the tank vehicle dynamic performance influenced by fluid sloshing using multidisciplinary simulation technique [Volume 8, Issue 1, 2018, Pages 183-202]
  • Foadaddini, A. Enhancing the performance of checkerboard Thomas method by using shared memory for solving the heat transfer problems on GPU [Volume 8, Issue 3, 2018, Pages 303-314]
  • Fooladpanjeh, S. An Experimental Study and Statistical Modelling on Compressive Properties of Epoxy/ Graphene/ Hydroxyapatite Nanocomposites [Volume 8, Issue 1, 2018, Pages 59-70]
  • Foshat, S. Experimental investigation on the effect of preprocessing in fabrication of superhydrphobic surfaces on laminar drag reduction [Volume 8, Issue 4, 2019, Pages 239-248]

G

  • Gandomkar, M. Extraction of hydrodynamic coefficients applying planning mechanism motion maneuver using computational fluid dynamics [Volume 8, Issue 1, 2018, Pages 215-228]
  • Ghadery, Sh. Design and simulation of a two-axis thermal MEMS accelerometer with optimized sensitivity [Volume 8, Issue 2, 2018, Pages 13-24]
  • Ghaedali, H. Investigation of sequence effect on welding residual stresses and distortion in a aluminum shell opening [Volume 8, Issue 3, 2018, Pages 1-14]
  • Ghaffari, V. Simulation and performance investigation of a typical guidance system with suitable modeling of the guidance system elements and its sensitivity with respect to aerodynamic coefficients [Volume 8, Issue 2, 2018, Pages 235-249]
  • Ghamami, M. optimization of locomotive structure by using of natural frequency and maximum stress constraints [Volume 8, Issue 1, 2018, Pages 23-33]
  • Ghanbari, F. Numerical investigation of heat transfer rate around isothermal elliptical cylinder under pulsating flow [Volume 8, Issue 2, 2018, Pages 161-176]
  • Ghanbari Oranj, B. Optimization of Radiation Shields Parameters in Multi-Layer Thermal Insulations [Volume 8, Issue 1, 2018, Pages 71-81]
  • Ghasemi, B. Investigation on the tank vehicle dynamic performance influenced by fluid sloshing using multidisciplinary simulation technique [Volume 8, Issue 1, 2018, Pages 183-202]
  • Ghasemi, M. Buckling analysis of functionally graded rectangular microplate in thermal environment based on exponential shear deformation theory using the modified couple stress theory [Volume 8, Issue 4, 2019, Pages 179-196]
  • Ghiasvand, A. Numerical simulation of FSW and FSSW with pinless tool of AA6061-T6 Al alloy by CEL approach [Volume 8, Issue 3, 2018, Pages 65-75]
  • Ghobadi, M. Aerothermal Analysis of Rotation and Rotational Buoyancy Effect on Internal Cooling of Gas Turbine Blade- An Experimental study [Volume 8, Issue 3, 2018, Pages 277-288]
  • Ghodsi, S.R. 2D and 3D Numerical Investigation of the Super Cavitation Phenomena in the case of Injection and No Injection of the Air and Water vapour on the Under Water Vehicle [Volume 8, Issue 1, 2018, Pages 229-240]
  • Gholamzade, A. sensitivity analysis of Operational Modal Approaches in damping identification and implementation on an industrial sample [Volume 8, Issue 3, 2018, Pages 177-192]
  • Golami, M. A new model for two-phase flow in a solar still improved by a porous layer [Volume 8, Issue 1, 2018, Pages 171-182]

H

  • Habibi, M.R. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]
  • Haghighi Khoshkhoo, Ramin Numerical study of solid-gas two phase flow in air-side of a compact heat exchanger using Lagrangian approach [Volume 8, Issue 2, 2018, Pages 143-159]
  • Hashemi, M. M. Numerical simulation of two-phase flow and study of behavior of aerosols and dust particles under different weather conditions and sedimentation process of dusts [Volume 8, Issue 2, 2018, Pages 251-264]
  • Hassani, S.M. Improvement of hydrothermal performance of microchannel heat sinks using V-shape pin-fins and Al2O3 / water nanofluid [Volume 8, Issue 4, 2019, Pages 211-228]
  • Hassanifard, S. Numerical simulation of FSW and FSSW with pinless tool of AA6061-T6 Al alloy by CEL approach [Volume 8, Issue 3, 2018, Pages 65-75]
  • Hassanzadeh, H. Reducing the undesirable effects of thermal asymmetry for a bus passengers by using airflow asymmetry under summer conditions [Volume 8, Issue 1, 2018, Pages 135-146]
  • Hatami, M. Flow Field Analysis of a Synthetic Jet in the Presence of a Crossflow: Application of Different Turbulence Models [Volume 8, Issue 4, 2019, Pages 197-210]
  • Heidari Shirazi, K. Study on Free Vibration of Buckled Cracked Plates Using Differential Quadrature Element Method [Volume 8, Issue 4, 2019, Pages 67-83]
  • Heidary Rouchi, A. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Hejranfar, K. Numerical simulation of wave-floating bodies interaction using a truly incompressible SPH method with artificial compressibility approach [Volume 8, Issue 1, 2018, Pages 241-252]
  • Heydari, K. Simulation and performance investigation of a typical guidance system with suitable modeling of the guidance system elements and its sensitivity with respect to aerodynamic coefficients [Volume 8, Issue 2, 2018, Pages 235-249]
  • Hoseini Sabzevari, S. A. Experimental Analysis of Effective Parameters on Human Balance During Standing and Gaiting [Volume 8, Issue 1, 2018, Pages 51-57]
  • Hoseini Sabzevari, Seyed A. Experimental Analysis of Elastic Dampers Effect on Reflected Waves from Plate Edges in Sound Localization [Volume 8, Issue 3, 2018, Pages 205-212]
  • Hosseinalipour, S. Mostafa Aerothermal Analysis of Rotation and Rotational Buoyancy Effect on Internal Cooling of Gas Turbine Blade- An Experimental study [Volume 8, Issue 3, 2018, Pages 277-288]
  • Hosseini, R. Experimental and numerical study of core and face-sheet thickness effects in sandwich panels with foam core and aluminum face-sheets subjected to blast loading [Volume 8, Issue 3, 2018, Pages 91-106]
  • Hosseini, R. Free lateral vibration analysis of inhomogeneous beams under various boundary conditions [Volume 8, Issue 3, 2018, Pages 123-135]
  • Hosseini, R. Experimental and Numerical Study of Deformation of FML Plates with the Same Thickness Under Explosive Loading [Volume 8, Issue 4, 2019, Pages 129-142]
  • Hosseini, Seyed H. Penetration of Armored Piercing Projectile into Ultra-High Strength Steel Targets: Numerical and Experimental Investigation [Volume 8, Issue 2, 2018, Pages 81-92]
  • Hosseini, Seyed H. Numerical and Experimental Investigation of Structural Integrity in Armored Vehicle Due to Explosive Loading [Volume 8, Issue 3, 2018, Pages 193-204]
  • Hosseinipour, Seyed J. Numerical and experimental study on the effect of forming speed in gradient warm deep drawing process [Volume 8, Issue 2, 2018, Pages 51-66]

I

  • Isvandzibaei, M. R. Analysis of Natural Frequency of Reinforced Multi-Layered Isotropic Cylindrical Shell with Three Rings under External Pressures Based on FSDT [Volume 8, Issue 3, 2018, Pages 233-246]
  • Izadpanah, E. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]

J

  • Jabbari, E. Numerical simulation of two-phase flow and study of behavior of aerosols and dust particles under different weather conditions and sedimentation process of dusts [Volume 8, Issue 2, 2018, Pages 251-264]
  • Jabbari Mostahsan, A. H. Optimization of Radiation Shields Parameters in Multi-Layer Thermal Insulations [Volume 8, Issue 1, 2018, Pages 71-81]
  • Jadidi, A. M. Investigating the limit behavior of cavitation phenomana around circular cylinder with various diameters at high speed cavitation tunnel [Volume 8, Issue 1, 2018, Pages 147-156]
  • Jafarbeglo, B. Design, fabrication and modeling of a new solar still desalination system and evaluation of its performance [Volume 8, Issue 2, 2018, Pages 205-220]
  • Jafari, A. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]
  • Jafari, H. Flow field modeling and performance improving of an axial turbine's using Adjoint method [Volume 8, Issue 1, 2018, Pages 127-133]
  • Jafari-Baghjeghaz, M. Study of the Compressive Behavior of Fiber-Metal Hybrid Structures Reinforced by Jute-Glass Fibers [Volume 8, Issue 4, 2019, Pages 153-164]
  • Jafari Gavzan, Iraj Investigating the limit behavior of cavitation phenomana around circular cylinder with various diameters at high speed cavitation tunnel [Volume 8, Issue 1, 2018, Pages 147-156]
  • Jaffari, M. Estimation of stress concentration factor of composite lamina with triangular hole using multiple linear regression [Volume 8, Issue 2, 2018, Pages 25-36]
  • Jahantigh, N. Numerical study of effect of uniform sinusoidal roughness elements on nanofluid natural convection, using lattice Boltzmann method [Volume 8, Issue 4, 2019, Pages 273-286]
  • Jalali, A. Noise Analysis & Flow Simulation in Angle Globe Valve with Different Cages [Volume 8, Issue 4, 2019, Pages 261-271]
  • Javadi Malabad, Seyed Mohammad Numerical study of solid-gas two phase flow in air-side of a compact heat exchanger using Lagrangian approach [Volume 8, Issue 2, 2018, Pages 143-159]
  • Joudaki, J. Penetration of Armored Piercing Projectile into Ultra-High Strength Steel Targets: Numerical and Experimental Investigation [Volume 8, Issue 2, 2018, Pages 81-92]
  • Joudaki, J. Numerical and Experimental Investigation of Structural Integrity in Armored Vehicle Due to Explosive Loading [Volume 8, Issue 3, 2018, Pages 193-204]

K

  • Kalantar, V. Experimental Investigation of the Forced Convective Heat Transfer of hybrid Cu / Fe3O4 Nanofluids [Volume 8, Issue 4, 2019, Pages 229-238]
  • Kargarsharifabad, H. Experimental Investigation of the Forced Convective Heat Transfer of hybrid Cu / Fe3O4 Nanofluids [Volume 8, Issue 4, 2019, Pages 229-238]
  • Karimi Ferezghi, B. A Numerical Modeling For Craters Produced By Soil Explosion Using SPH Method [Volume 8, Issue 4, 2019, Pages 53-66]
  • Kazemi, Sayyed R. The effect of horizon size and projectile shape on the crack growth in the cracked beam using peridynamic method [Volume 8, Issue 4, 2019, Pages 39-51]
  • Khadem, Sayyed A. Noise Analysis & Flow Simulation in Angle Globe Valve with Different Cages [Volume 8, Issue 4, 2019, Pages 261-271]
  • Khatibi, M. Numerical study of the effects of aluminum particle additives in adsorbent bed on the performance of adsorption refrigeration systems [Volume 8, Issue 3, 2018, Pages 261-275]
  • Khodarahmi, H. Experimental and numerical study of core and face-sheet thickness effects in sandwich panels with foam core and aluminum face-sheets subjected to blast loading [Volume 8, Issue 3, 2018, Pages 91-106]
  • Khodarahmi, H. Experimental and Numerical Study of Deformation of FML Plates with the Same Thickness Under Explosive Loading [Volume 8, Issue 4, 2019, Pages 129-142]
  • Khondabi, R. Experimental and numerical study of core and face-sheet thickness effects in sandwich panels with foam core and aluminum face-sheets subjected to blast loading [Volume 8, Issue 3, 2018, Pages 91-106]
  • Khorshidi, K. Buckling analysis of functionally graded rectangular microplate in thermal environment based on exponential shear deformation theory using the modified couple stress theory [Volume 8, Issue 4, 2019, Pages 179-196]
  • Khoshnevis, A. B. Experimental Investigation of Effects of Split Blended Winglet at Tip Vortex Structure of Micro-Aerial Vehicle with Hot-Wire Anemometry [Volume 8, Issue 2, 2018, Pages 193-204]
  • Khoshnood, Abdol M. Investigation on the tank vehicle dynamic performance influenced by fluid sloshing using multidisciplinary simulation technique [Volume 8, Issue 1, 2018, Pages 183-202]
  • Khosh sima, B. Experimental determination of the effect of titanium nanoalloy on mechanical properties of girth welding on Iranian natural gas transmission pipelines [Volume 8, Issue 3, 2018, Pages 213-219]
  • Khoshvaght-Aliabadi, M. Improvement of hydrothermal performance of microchannel heat sinks using V-shape pin-fins and Al2O3 / water nanofluid [Volume 8, Issue 4, 2019, Pages 211-228]
  • Khosravifard, A. Analysis of plates under the application of moving concentrated loads using a meshfree method with adaptive re-arrangement of nodes [Volume 8, Issue 4, 2019, Pages 11-25]
  • Kiani, A. Numerical analysis of a new specimen for conducting fracture experiments under mixed mode I/III loading [Volume 8, Issue 3, 2018, Pages 247-259]
  • Kolahdooz, A. Flow Field Analysis of a Synthetic Jet in the Presence of a Crossflow: Application of Different Turbulence Models [Volume 8, Issue 4, 2019, Pages 197-210]
  • Korkzan, S. Shear Behavior Analysis of Steel Plate Girders with Local Corrugated Web under Monotonic Loading [Volume 8, Issue 3, 2018, Pages 77-90]

L

  • Lotfi, M. Design, fabrication and modeling of a new solar still desalination system and evaluation of its performance [Volume 8, Issue 2, 2018, Pages 205-220]

M

  • Mahdian, A. The impact analysis on airfield matting plate with considering the aircraft tyre deflection [Volume 8, Issue 2, 2018, Pages 69-79]
  • Makvandi, H. Study on Free Vibration of Buckled Cracked Plates Using Differential Quadrature Element Method [Volume 8, Issue 4, 2019, Pages 67-83]
  • Maleki, S. Investigation of nonlinear pull-in phenomena in functionally graded micro-beams under electrostatic excitation [Volume 8, Issue 3, 2018, Pages 137-151]
  • Malekzadeh Fard, K. The effects of arbitrary boundary conditions on a laminated composite plate response subjected to large mass & low velocity impact [Volume 8, Issue 1, 2018, Pages 35-49]
  • Marashi, M. H. Investigation on the tank vehicle dynamic performance influenced by fluid sloshing using multidisciplinary simulation technique [Volume 8, Issue 1, 2018, Pages 183-202]
  • Marashi, Sayed S. Investigation of nonlinear pull-in phenomena in functionally graded micro-beams under electrostatic excitation [Volume 8, Issue 3, 2018, Pages 137-151]
  • Mardani, R. Flow field modeling and performance improving of an axial turbine's using Adjoint method [Volume 8, Issue 1, 2018, Pages 127-133]
  • Masoumi Dehaghi, I. Investigation of sequence effect on welding residual stresses and distortion in a aluminum shell opening [Volume 8, Issue 3, 2018, Pages 1-14]
  • Mazloumi, S. H. Improvement of hydrothermal performance of microchannel heat sinks using V-shape pin-fins and Al2O3 / water nanofluid [Volume 8, Issue 4, 2019, Pages 211-228]
  • Mazraeh ei Farahani, M. Stress and Strain Analysis of Femur in Taylor Spatial Frame [Volume 8, Issue 1, 2018, Pages 13-21]
  • Miralam, M. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]
  • Moavenian, M. Experimental Analysis of Elastic Dampers Effect on Reflected Waves from Plate Edges in Sound Localization [Volume 8, Issue 3, 2018, Pages 205-212]
  • Moayyedi, M. K. Numerical simulation of two-phase flow and study of behavior of aerosols and dust particles under different weather conditions and sedimentation process of dusts [Volume 8, Issue 2, 2018, Pages 251-264]
  • Modarres, M. Design and simulation of a two-axis thermal MEMS accelerometer with optimized sensitivity [Volume 8, Issue 2, 2018, Pages 13-24]
  • Modarres Gheisari, Seyed M. M. Piezoelectric Configurations Effects on Acoustic Energy Density in an Ultrasonic Microcontainer for Preparing Nanoemulsion [Volume 8, Issue 3, 2018, Pages 15-28]
  • Moghaddam, S. Analysis Of Turbulent Combined Heat Transfer (Mixed Convection-Thermal Radiation) Heat Transfer in a Vertical Three Dimensional Duct With Variable Thermo-physical Properties [Volume 8, Issue 1, 2018, Pages 83-97]
  • Mohamadkhani, H. Simulation and performance investigation of a typical guidance system with suitable modeling of the guidance system elements and its sensitivity with respect to aerodynamic coefficients [Volume 8, Issue 2, 2018, Pages 235-249]
  • Mohammadi, A. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]
  • Mohammadi, M. Improvement of hydrothermal performance of microchannel heat sinks using V-shape pin-fins and Al2O3 / water nanofluid [Volume 8, Issue 4, 2019, Pages 211-228]
  • Mohammadiun, H. Optimization of shell and tube heat exchangers using heuristic algorithms [Volume 8, Issue 3, 2018, Pages 153-163]
  • Mohammadiun, M. Optimization of shell and tube heat exchangers using heuristic algorithms [Volume 8, Issue 3, 2018, Pages 153-163]
  • Mohammadzadeh Kowsari, M. Numerical study of the effects of aluminum particle additives in adsorbent bed on the performance of adsorption refrigeration systems [Volume 8, Issue 3, 2018, Pages 261-275]
  • Mojahedi, M. Investigation of instability and vibration behavior of microbeam-gyroscope with considering distribution of proof mass [Volume 8, Issue 2, 2018, Pages 93-106]
  • Molla-Alipour, M. Parametric Analysis of Non-Uniform Shear Load on the Displacement and Stress Components of for FG Rectangular Plates Resting on Two-Parameter Elastic Foundation [Volume 8, Issue 4, 2019, Pages 111-127]
  • Mondali, M. optimization of locomotive structure by using of natural frequency and maximum stress constraints [Volume 8, Issue 1, 2018, Pages 23-33]
  • Moradi, Sh. Study on Free Vibration of Buckled Cracked Plates Using Differential Quadrature Element Method [Volume 8, Issue 4, 2019, Pages 67-83]

N

  • Naderi, R. A Numerical Modeling For Craters Produced By Soil Explosion Using SPH Method [Volume 8, Issue 4, 2019, Pages 53-66]
  • Najafi, F. Gear Fault Detection Based on Best Feature Selection by Particle Swarm Optimization [Volume 8, Issue 3, 2018, Pages 49-64]
  • Najafi, M. Penetration of Armored Piercing Projectile into Ultra-High Strength Steel Targets: Numerical and Experimental Investigation [Volume 8, Issue 2, 2018, Pages 81-92]
  • Najafi, M. Numerical and Experimental Investigation of Structural Integrity in Armored Vehicle Due to Explosive Loading [Volume 8, Issue 3, 2018, Pages 193-204]
  • Najafpoor, M. Noise Analysis & Flow Simulation in Angle Globe Valve with Different Cages [Volume 8, Issue 4, 2019, Pages 261-271]
  • Nazari, M. R. Experimental Investigation of the Forced Convective Heat Transfer of hybrid Cu / Fe3O4 Nanofluids [Volume 8, Issue 4, 2019, Pages 229-238]
  • Nehsat, A. R. Experimental Investigation of Effects of Split Blended Winglet at Tip Vortex Structure of Micro-Aerial Vehicle with Hot-Wire Anemometry [Volume 8, Issue 2, 2018, Pages 193-204]
  • Nemati, M. Investigation of Magnetic Field Effect on Nanofluid Mixed Convection inside Lid-Driven K-shaped Enclosure Using Lattice Boltzmann Method [Volume 8, Issue 1, 2018, Pages 111-126]
  • Nezamivand Chegini, S. Gear Fault Detection Based on Best Feature Selection by Particle Swarm Optimization [Volume 8, Issue 3, 2018, Pages 49-64]
  • Niaz, M. Dynamic response of thick plates under excitation of a moving mass utilizing BCOPs [Volume 8, Issue 3, 2018, Pages 165-175]
  • Niazmand, H. Numerical study of the effects of aluminum particle additives in adsorbent bed on the performance of adsorption refrigeration systems [Volume 8, Issue 3, 2018, Pages 261-275]
  • Nikkhoo, A. Dynamic response of thick plates under excitation of a moving mass utilizing BCOPs [Volume 8, Issue 3, 2018, Pages 165-175]
  • Noruzi, M.S. Aerothermal Analysis of Rotation and Rotational Buoyancy Effect on Internal Cooling of Gas Turbine Blade- An Experimental study [Volume 8, Issue 3, 2018, Pages 277-288]
  • Nouri, N. M. Experimental investigation on the effect of preprocessing in fabrication of superhydrphobic surfaces on laminar drag reduction [Volume 8, Issue 4, 2019, Pages 239-248]

O

  • Oliazadeh, P. Experimental investigation on natural frequencies of thin rectangular plates using contact and non-contact methods [Volume 8, Issue 1, 2018, Pages 1-11]
  • Omidvar, A. Numerical investigation of heat transfer rate around isothermal elliptical cylinder under pulsating flow [Volume 8, Issue 2, 2018, Pages 161-176]

P

  • Paknejad, R. The effects of arbitrary boundary conditions on a laminated composite plate response subjected to large mass & low velocity impact [Volume 8, Issue 1, 2018, Pages 35-49]
  • Parhizkar, H. Flow field modeling and performance improving of an axial turbine's using Adjoint method [Volume 8, Issue 1, 2018, Pages 127-133]
  • Parsaei, M. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]
  • Pirmohammad, S. Numerical analysis of a new specimen for conducting fracture experiments under mixed mode I/III loading [Volume 8, Issue 3, 2018, Pages 247-259]
  • Pishkar, I. Study of the effect of nano-fluid in the diesel-cooled diesel engine oil cooler [Volume 8, Issue 2, 2018, Pages 221-233]
  • Poorveis, D. Study on Free Vibration of Buckled Cracked Plates Using Differential Quadrature Element Method [Volume 8, Issue 4, 2019, Pages 67-83]
  • Pourmoayed, A.R. A new model for two-phase flow in a solar still improved by a porous layer [Volume 8, Issue 1, 2018, Pages 171-182]

R

  • Rabbani, E. Dynamic response of thick plates under excitation of a moving mass utilizing BCOPs [Volume 8, Issue 3, 2018, Pages 165-175]
  • Raeesi, M. Reducing the undesirable effects of thermal asymmetry for a bus passengers by using airflow asymmetry under summer conditions [Volume 8, Issue 1, 2018, Pages 135-146]
  • Rahi, A. Blades Vibration Response Study of a Bladed Disk System Connecting with Two Lacing Wires and Mistuning Effect [Volume 8, Issue 4, 2019, Pages 97-109]
  • Rahmati, A. R. Investigation of Magnetic Field Effect on Nanofluid Mixed Convection inside Lid-Driven K-shaped Enclosure Using Lattice Boltzmann Method [Volume 8, Issue 1, 2018, Pages 111-126]
  • Rahmati, R. A new model for two-phase flow in a solar still improved by a porous layer [Volume 8, Issue 1, 2018, Pages 171-182]
  • Rajabi, I. Parametric Analysis of Non-Uniform Shear Load on the Displacement and Stress Components of for FG Rectangular Plates Resting on Two-Parameter Elastic Foundation [Volume 8, Issue 4, 2019, Pages 111-127]
  • Ramezani Dashtemian, M. Gear Fault Detection Based on Best Feature Selection by Particle Swarm Optimization [Volume 8, Issue 3, 2018, Pages 49-64]
  • Razavi, Seyed E. A Characteristic-Based Finite-Volume Solution of Incompressible Flows with Heat Transfer [Volume 8, Issue 3, 2018, Pages 315-326]
  • Riasi, A.R. Sensitivity Analysis and optimization of the Inducer in a Rotary Gas Separator of Electrical Submersible Pump under single phase and two phase conditions [Volume 8, Issue 3, 2018, Pages 289-302]
  • Rohani, A. Estimation of stress concentration factor of composite lamina with triangular hole using multiple linear regression [Volume 8, Issue 2, 2018, Pages 25-36]
  • Rouzbahani, F. Numerical simulation of wave-floating bodies interaction using a truly incompressible SPH method with artificial compressibility approach [Volume 8, Issue 1, 2018, Pages 241-252]

S

  • Saadi, M. Optimization of shell and tube heat exchangers using heuristic algorithms [Volume 8, Issue 3, 2018, Pages 153-163]
  • Sabokrouh, M. Experimental determination of the effect of titanium nanoalloy on mechanical properties of girth welding on Iranian natural gas transmission pipelines [Volume 8, Issue 3, 2018, Pages 213-219]
  • Safarpour, P. Piezoelectric Configurations Effects on Acoustic Energy Density in an Ultrasonic Microcontainer for Preparing Nanoemulsion [Volume 8, Issue 3, 2018, Pages 15-28]
  • Safavinejad, A. Optimal search of heat sources location in conjugate natural convection with surface radiation in a two-dimensional enclosure utilizing particle swarm optimization algorithm [Volume 8, Issue 2, 2018, Pages 177-191]
  • Saghatoleslami, N. A numerical study of the effects of effective parameters on porous medium burner by creating a groove in the porosity matrix with the aim of reducing NOx emissions [Volume 8, Issue 3, 2018, Pages 327-340]
  • Salehi, M. Structural damage localization in beam-like structures using Multi-channel Empirical Mode Decomposition of random response [Volume 8, Issue 3, 2018, Pages 221-231]
  • Salehi, Me. sensitivity analysis of Operational Modal Approaches in damping identification and implementation on an industrial sample [Volume 8, Issue 3, 2018, Pages 177-192]
  • Salimpour, M.R. Study of the effect of nano-fluid in the diesel-cooled diesel engine oil cooler [Volume 8, Issue 2, 2018, Pages 221-233]
  • Samadi, B. Investigation of sequence effect on welding residual stresses and distortion in a aluminum shell opening [Volume 8, Issue 3, 2018, Pages 1-14]
  • Sarparast, H. Free lateral vibration analysis of inhomogeneous beams under various boundary conditions [Volume 8, Issue 3, 2018, Pages 123-135]
  • Sedighi, M. Optimization of Radiation Shields Parameters in Multi-Layer Thermal Insulations [Volume 8, Issue 1, 2018, Pages 71-81]
  • Sefid, M. Numerical solution to the multi- layer core- annular flow of two fluids with different viscosities using Spectral Element Method [Volume 8, Issue 4, 2019, Pages 249-260]
  • Sekhavat, S. Experimental investigation on the effect of preprocessing in fabrication of superhydrphobic surfaces on laminar drag reduction [Volume 8, Issue 4, 2019, Pages 239-248]
  • Shahbazi, H. Design of a Fractional-order PID controller and a Commen PID controller with Experimental Evaluation of them on Performance of Attitude Control of a quadrotor [Volume 8, Issue 2, 2018, Pages 37-50]
  • Shahbazian, H.R. Aerothermal Analysis of Rotation and Rotational Buoyancy Effect on Internal Cooling of Gas Turbine Blade- An Experimental study [Volume 8, Issue 3, 2018, Pages 277-288]
  • Shahgholi, M. Free lateral vibration analysis of inhomogeneous beams under various boundary conditions [Volume 8, Issue 3, 2018, Pages 123-135]
  • Shahriari, A.R. Numerical study of effect of uniform sinusoidal roughness elements on nanofluid natural convection, using lattice Boltzmann method [Volume 8, Issue 4, 2019, Pages 273-286]
  • Shamsoddini, R. 2D and 3D Numerical Investigation of the Super Cavitation Phenomena in the case of Injection and No Injection of the Air and Water vapour on the Under Water Vehicle [Volume 8, Issue 1, 2018, Pages 229-240]
  • Shariati, A. A numerical study of the effects of effective parameters on porous medium burner by creating a groove in the porosity matrix with the aim of reducing NOx emissions [Volume 8, Issue 3, 2018, Pages 327-340]
  • Shariat panahi, M. optimization of locomotive structure by using of natural frequency and maximum stress constraints [Volume 8, Issue 1, 2018, Pages 23-33]
  • Soleymani, M. Investigation of Resin Pocket Area Effect on Crack Growth in Foam Core of Composite Wind Turbine Blade by the Finite Element Method [Volume 8, Issue 4, 2019, Pages 27-38]
  • Soltanpour, M.R. Control of a Class of Underactuated Mechanical Systems by Using Fuzzy Sliding Mode Control with low computing volume and without Chattering [Volume 8, Issue 3, 2018, Pages 107-122]

T

  • Tahani, M. Investigation of Resin Pocket Area Effect on Crack Growth in Foam Core of Composite Wind Turbine Blade by the Finite Element Method [Volume 8, Issue 4, 2019, Pages 27-38]
  • Taheri, M. Reducing the undesirable effects of thermal asymmetry for a bus passengers by using airflow asymmetry under summer conditions [Volume 8, Issue 1, 2018, Pages 135-146]
  • Tahmasebipour, M. Design and simulation of a two-axis thermal MEMS accelerometer with optimized sensitivity [Volume 8, Issue 2, 2018, Pages 13-24]
  • Tahmasebipour, M. Investigation of the effect of geometrical parameters on the out-of-plane displacement of a T-shaped piezoelectric microcantilever [Volume 8, Issue 4, 2019, Pages 1-9]
  • Talebi, M. Hossein Experimental Investigation of the Forced Convective Heat Transfer of hybrid Cu / Fe3O4 Nanofluids [Volume 8, Issue 4, 2019, Pages 229-238]
  • Tamimi, P. Investigation of single point incremental forming parameters effect on the blanks produced by friction stir welding [Volume 8, Issue 4, 2019, Pages 85-96]
  • Tikani, V. Design of a Fractional-order PID controller and a Commen PID controller with Experimental Evaluation of them on Performance of Attitude Control of a quadrotor [Volume 8, Issue 2, 2018, Pages 37-50]
  • Tooranjipour, P. Analysis of plates under the application of moving concentrated loads using a meshfree method with adaptive re-arrangement of nodes [Volume 8, Issue 4, 2019, Pages 11-25]

V

  • Vahdati, A.R. Experimental Analysis the Effect of Lubricant and Ultrasonic Excitation of Hemispherical-head Tool on the Vertical Component of Forming Force in SPIF [Volume 8, Issue 2, 2018, Pages 107-123]
  • Vahdati, M. Experimental Analysis the Effect of Lubricant and Ultrasonic Excitation of Hemispherical-head Tool on the Vertical Component of Forming Force in SPIF [Volume 8, Issue 2, 2018, Pages 107-123]
  • Vahidi, B. The Effect of the Kind of Attachment of Primary Cilium to Cell in Its Response to the Fluid Flow: A 3D Computational Simulation [Volume 8, Issue 1, 2018, Pages 203-213]
  • Vahidi, B. Computational simulation of airflow in the human trachea-bronchial airways [Volume 8, Issue 2, 2018, Pages 125-142]
  • Varmazyar, M. Stability Analysis of Natural Convection with Variable Physical Coefficients Using Linear Stability Theory [Volume 8, Issue 1, 2018, Pages 157-169]
  • Vatankhah, R. Analysis of plates under the application of moving concentrated loads using a meshfree method with adaptive re-arrangement of nodes [Volume 8, Issue 4, 2019, Pages 11-25]
  • Vaziri, M. A. Numerical and experimental fatigue life estimation of airplane emergency door bracket in various mission profiles [Volume 8, Issue 4, 2019, Pages 143-152]

Y

  • Yazdani, M. H. Numerical and experimental fatigue life estimation of airplane emergency door bracket in various mission profiles [Volume 8, Issue 4, 2019, Pages 143-152]

Z

  • Zahedinia, M. Experimental and Numerical Study of Deformation of FML Plates with the Same Thickness Under Explosive Loading [Volume 8, Issue 4, 2019, Pages 129-142]
  • Zamani, P. Investigation of Resin Pocket Area Effect on Crack Growth in Foam Core of Composite Wind Turbine Blade by the Finite Element Method [Volume 8, Issue 4, 2019, Pages 27-38]
  • Zandi, M. Piezoelectric Configurations Effects on Acoustic Energy Density in an Ultrasonic Microcontainer for Preparing Nanoemulsion [Volume 8, Issue 3, 2018, Pages 15-28]
  • Zandi, Seyed M. Shear Behavior Analysis of Steel Plate Girders with Local Corrugated Web under Monotonic Loading [Volume 8, Issue 3, 2018, Pages 77-90]
  • Zia shamami, M. Experimental and Numerical Study of Deformation of FML Plates with the Same Thickness Under Explosive Loading [Volume 8, Issue 4, 2019, Pages 129-142]
  • Zia Shamami, M. Experimental and numerical study of core and face-sheet thickness effects in sandwich panels with foam core and aluminum face-sheets subjected to blast loading [Volume 8, Issue 3, 2018, Pages 91-106]
  • Zolfaghari, A.R. Reducing the undesirable effects of thermal asymmetry for a bus passengers by using airflow asymmetry under summer conditions [Volume 8, Issue 1, 2018, Pages 135-146]
  • Zolfaghari, A.R. Enhancing the performance of checkerboard Thomas method by using shared memory for solving the heat transfer problems on GPU [Volume 8, Issue 3, 2018, Pages 303-314]